Have any questions? Contact us

317-334-0569

5052-H32 Aluminum Sheet

5052 is the highest strength grade of aluminum of the more common non-heat-treatable alloys. Features of 5052 include higher fatigue strength than most aluminum alloys, excellent resistance to salt water atmosphere, excellent weldability and workability, and excellent finishing characteristics. Anodic coatings are bright and clear.

Typical Mechanical Properties – 5052 Sheet:

5052-H32 5052-O
Tensile Strength (psi) 22,000 28,000
Yield Strength (psi) 21,000 13,000
Elongation % in 2″ (.063″ Sheet) 12 25
Min. 90° Cold Bend Radius for .064″ thick 0 0
Brinell Hardness 60 47
   Ultimate Shearing Strength (psi) 20,000 18,000

Note: “Typical Mechanical Properties” listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES.

5052 H-32 Aluminum Sheets Diagram

THICKNESS WEIGHT/ SQUARE FOOT (LBS)
.032 .447
.040 .559
.050 .698
.063 .880
.080 1.117
.090 1.257
.125 1.746

AED stocks 5052 sheet in H-32 Temper, which meets Federal Specification QQ-A-250/8.

Stocked in full sheets (48″ x 144″); cut pieces available. Other thicknesses and tempers may be available.