Have any questions? Contact us

317-334-0569

2024-T3 Aluminum Sheet & Plate

2024 is a high strength, fatigue-resistant aluminum alloy used by the motorsports and aircraft industries for structural applications. It has good machinability, and good corrosion in non-industrial atmospheres, but poor corrosion resistance in marine applications. 2024 is available from AED in bars, sheets, and plates. 2024 is sometimes used in place of 7075.

Typical Mechanical Properties – 2024:

Bare: Alclad:
2024-O 2024-T3 2024-T4, T351 2024-O 2024-T3 2024-T4, T351
Tensile Strength (psi) 27,000 70,000 68,000 26,000 65,000 64,000
Yield Strength (psi) 11,000 50,000 47,000 11,000 45,000 42,000
Elongation % in 2″ .063″ Sheet 20 18 20 20 18 19
     1/2″ Round 22 19
Min. 90° Cold Bend Radius for .064″ thick 0 3-5T 3-5T
Brinell Hardness 47 120
   Ultimate Shearing
Strength (psi)
18,000 41,000 41,000 18,000 40,000 40,000

 

Note: “Typical Mechanical Properties” listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES.

2024 Aluminum Sheets Diagram

AED typically stocks 2024 plate in the “bare” form (T3 / T351), which meets Federal Specification QQ-A-250/4.

 

Stocked in full sheets, 48″ x 144″; cut pieces available. Other sheet and plate sizes may also be available on request, as well as “Alclad,” which meets QQ-A-250/5. Cladding provides superior corrosion resistance.

THICKNESS WEIGHT/ SQUARE FOOT (LBS)
.125 1.818
.250 3.636
.375 5.454
.500 7.272