Have any questions? Contact us

317-334-0569

2024-T3 Aluminum Hex Bar

Typical Mechanical Properties – 2024:

Bare: Alclad:
2024-O 2024-T3 2024-T4, T351 2024-O 2024-T3 2024-T4, T351
Tensile Strength (psi) 27,000 70,000 68,000 26,000 65,000 64,000
Yield Strength (psi) 11,000 50,000 47,000 11,000 45,000 42,000
Elongation % in 2″   .063″ Sheet 20 18 20 20 18 19
     1/2″ Round 22 19
Min. 90° Cold Bend Radius for .064″ thick 0 3-5T 3-5T
Brinell Hardness 47 120
   Ultimate Shearing
Strength (psi)
18,000 41,000 41,000 18,000 40,000 40,000

 

Note: “Typical Mechanical Properties” listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES.

Hex Bar Diagram AED typically stocks 2024 Round, Flat, Square and Hex Bars in extruded form (T3511), which meets Federal Specification QQ-A-200/3. Cold finished (T351), which meets QQ-A-225/6, may also be available on request. Stocked in 12-foot lengths; cut pieces available.

DIAMETER WEIGHT/FOOT (LBS)
.375 .1463
.437 .1993
.500 .2600
.625 .4060
.750 .5850
1.000 1.020