Have any questions? Contact us

317-334-0569

1018 Mild Steel Cold Finish Flat Bar

1018 is a low-carbon mild steel, that is relatively soft, easily weldable and formable. AED stocks a diverse range of 1018 cold finished round and flat bars, and other dimensions are also available. Meets ASTM A108.

Typical Mechanical Properties:

1″ Round, Cold Drawn
Tensile Strength (psi) 85,000
Yield Point (psi) 70,000
Elongation (% in 2″) 28
Reduction of Area (%) 55
Brinell Hardness 167

Note: “Typical Mechanical Properties” listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES.

Flat Bar Diagram

Stocked in 11 to 13 foot random lengths; cut pieces available.

THICKNESS WIDTH WEIGHT/FOOT (LBS)
.125 .500 .2127
.125 .750 .3191
.125 1.000 .4254
.125 1.500 .6381
.125 1.750 .7455
.125 2.000 .8508
.125 3.000 1.276
.125 4.000 1.702
.187 .375 .2393
.187 1.000 .6381
.187 1.500 .9572
.187 2.000 1.276
.250 .500 .4254
.250 1.000 .8508
.250 2.000 1.702
.250 3.000 2.552
.250 3.500 2.978
.250 4.000 3.403
.250 5.000 4.254
.250 6.000 5.105
.250 8.000 6.806
.312 3.000 3.191
.375 .875 1.117
.375 1.000 1.276
.375 2.000 2.552
.375 3.000 3.829
.375 3.500 4.467
.375 4.000 5.105
.375 10.000 12.76
.500 1.000 1.702
.500 2.000 3.403
.500 2.500 4.254
.500 3.000 5.105
.500 4.000 6.806
.500 5.000 8.508
.500 8.000 13.610
.625 1.500 3.191
1.000 1.500 5.105
1.000 2.000 6.806
1.000 4.000 13.610